The packaging of metal ring gaskets should strictly follow protective regulations to ensure their precise structure and sealing performance.
Partition box anti-collision:
Customized cartons or wooden boxes are used, and foam/pearl cotton partitions are set inside for separate storage to avoid mutual extrusion and deformation of ring gaskets;
Single box loading capacity needs to be controlled: weight ≤ 25kg (to prevent box bottom cracking), void ratio<15% (to reduce shaking);
Octagonal gaskets and oval gaskets are classified for packaging (oval gaskets require higher accuracy and need to be separately divided into grids).
Surface protection measures:
The sealing surface of the ring gasket is covered with PE protective film to prevent scratches (the roughness of the grinding surface Ra ≤ 0.8 μ m, scratches can cause sealing failure);
Stainless steel ring gaskets require moisture-proof treatment (desiccants should be placed inside the box to prevent chloride ion corrosion).
High temperature alloy gaskets (such as Inconel) need to be transported by a constant temperature vehicle (-10 ℃~40 ℃) to prevent cold brittleness or oxidation.
There are many types of RTJ gaskets, including R Gasket,RX Gasket,BX Gasket, SBX Gasket,IX Gasket,flange connections,and various customized products.We will do more sharing about ring joint gasket.
The content of this article is for learning exchange and reference only. The information is sourced from publicly available online channels. Readers are advised to discern and make their own judgments. This website does not assume any responsibility.