Elliptical ring gasket are specifically designed for use with bolts with holes at the end of the screw, and spring gasket are installed under the nut to prevent loosening. In order to insert the open-end pin from the groove of the nut into the hole of the screw and prevent the nut from automatically loosening, it is primarily used in places with oscillating or alternating loads. Spring gasket are widely used in load-bearing and non load-bearing structures of typical mechanical products, characterized by low interest rates, easy installation, and suitability for parts that require frequent assembly and disassembly. But the anti loosening ability of the spring gasket is very low.
The primary effect of using octagonal gasket in conjunction with screws and bolts is to prevent loosening. The most basic effect of a spring gasket is to apply a force after tightening the screw bolt. The resistance between screws, bolts, and materials is added to prevent loosening. The metal ring gasket tightens the material in a sensation, preventing loosening between screws and bolts and the material. Simply put, the effect of a spring gasket is to serve as a protective method. The spring gasket has another effect, which is a three component assembly composed of cooperating screws and bolts, and is also used together with a flat gasket. The combination screw of non-standard gaskets made of alloy steel and cooperative spring gasket. It is widely used in the market. More and more people are fond of using this combination with spring gasket.
There are many types of RTJ gaskets, including R Gasket,RX Gasket,BX Gasket, SBX Gasket,IX Gasket,and various customized products.We will do more sharing about ring joint gasket.